Search
Browse by Manufacturer
 
 



 
 
 

     

[ASC90011-FUTK4905] Super Special - RC10B6 Team Kit & Futaba 4PK

<< Previous in Buggies Next in Buggies >>
Price: $700.00
In Stock QUANTITY
Item Number: ASC90011-FUTK4905
Manufacturer: Associated
Manufacturer Part No: ASC90011-FUTK4905
**Additional Technical Info will Be Added When It Becomes Available.**
This is the 1/10 scale Electric Powered, Radio Controlled,
RC10B6 Team Buggy Kit from Team Associated

The differences between the RC10B6 and RC10B6D are as follows;
The RC10B6 is configured for high to very-high traction surfaces.
The RC10B6D is configured for low to high traction surfaces.
RC10B6 RC10B6D
Laydown Transmssion Upright Transmission
Gear Differential Ball Differential
Gull Wing Front Suspension Arms Flat Front Suspension Arms
Wide Front Shock Tower Narrow Front Shock Tower

FEATURES

Chassis: Hard anodized aluminum, --" (--mm) thick pocketed chassis
optional weights (not included) allow weight bias tuning,
repositioned A plate provides maximum front end clearance
Drive: Two wheel drive with heavy duty rear axle, aluminum front
axle and rear hexes for less rotating mass
Transmission: Stealth laydown 3-gear type offers lower CG and
reduced polar moment
Differential: Gear type for greater speed and forward acceleration
Suspension: Gull-wing front arms for lower CG and increased on-
power steering, updated ball cups and turnbuckles for precise
adjustment and durability
Motor Mount:
central positioning for optimum side-to-side balance
Shocks: V2 12mm Big Bore aluminum body with 3mm TiN coated shafts
and low friction X-rings for improved smoothness, Factory Team
aluminum shock bushings, rear shocks may be mounted on front or
rear of rear arms
Ball Bearings: Full set Factory Team upgraded
Steering: One-piece blocks with bolt-on Ackermann plate, Ackermann
refers to the effect of the inner front wheel rotating faster than
the outer front wheel during turns, reverse bell-crank steering
rack design offers more room for electronics
Body: Clear buggy, screw-mounted wing by JConcepts
Battery Hold-Down Strap: Adjustable to allow weight bias tuning

INCLUDES

RC10B6 Team Buggy Kit with Body, Rear Wing, Shocks, Decals and
Instruction Manual

REQUIREMENTS
Radio: 2-channel with high-torque steering servo
Motor: 540 size
ESC:
Battery: 7.4V LiPo or 6.6V LiFe, saddle, shorty or square pack
Battery Charger:
Wheels: 1/10 scale buggy
Tires: 1/10 scale buggy
Pinion Gear: 48P
Paint, building and track equipment

PLUS

This is the Futaba 4PX 2.4GHz FASST, T-FHSS, S-FHSS
4-Channel Surface Computer Radio System with the
R304SB 2.4GHz FHSS 4-Channel Telemetry Receiver.
**Transmitter and Receiver Only, Servos Not Included**

FEATURES

30% faster and 0.5oz (15g) lighter than the Futaba 4PKS-R
3.5" (89mm) QVGA (Quarter Video Graphics Array) TFT (Thin Film
Transistor) color LCD screen
31 telemetry sensor slots available (sensors not included, and must
be purchased separately)
Synthesized voice for telemetry data
Built-in S.Bus servo/Futaba ESC/telemetry sensor programmer
Multiple crawler functions including 4WS mixing and Dual ESC mixing
Large assignable switch on bottom of transmitter
5 programmable mixes, 40 model memory
Multi-function jog switch
Steering wheel can be switched for left-handed drivers
Three grip thickness options (two included), built-in vibration
Adjustable, rigid throttle trigger
Micro memory card slot
Free updateable software
Internal aluminum frame
Adjustable built-in antenna
Note: Comes with a 4 Cell dry battery holder installed in the transmitter.
Please read the warning on page 10, this is only to be used when
you are programming the transmitter. Use a NiMH or LiFe when racing
One year limited warranty through Hobby Services beginning at date of
purchase

INCLUDES

Futaba 4PX 4-Channel Surface Transmitter with
R304SB 4-Channel Telemetry Receiver
Manual

REQUIREMENTS

5C 6V NiMH battery (recommended FUTM1473 FHT5F1700B) or
2C 6.6V LiFe battery (recommended HCAM6521)
Servos of modeler's choice
Order FUTM1832 for NiMH capable transmitter battery charger

SPECIFICATIONS

Transmitter-
Power Requirement: 6V NIMH or 6.6V LiFe
(per page 19 DO NOT use AA batteries unless only programming)
Compatible Receivers: Futaba R304SB, R304SBE, R2104GF,
R204FG, R204FGE, R614FS, R614FFE, R203GF, and R2004GF.
Current Drain: 300mA or less (when T-FHSS, vibration off, back
lighting on)

Receiver-
Power Requirement: 4.8 - 7.4V battery (3.5 - 8.4V usable)
(dry cells cannot be used)
Receiving Frequency: 2.4GHz
System: T-FHSS (auto detection)
Dimensions: 1.38 x 0.91 x 0.33" (35.1 x 23.2 x 8.5mm)

Compatible sensors include;
FUTM0854 SBS-01T Temp Sensor (ideal for engines)
FUTM0856 SBS-01TE EP Temp Sensor, (ideal for motors)
FUTM0852 SBS-01RM Magnet Sensor (measures speed from 0-999,999
RPM range
FUTM0855 SBS-01V EXT. Voltage Sensor (measures external power
supply voltages up to 100V
Shopping Cart
Your cart is empty.
Mailing Lists
Sign up on this mailing list to received discount coupons !!!!
Products

 
Click on Track
 Cerra Gordo
         Speedway        
 
 
Bodies By Justyne
Bodies By Miles
 
 
TheRcShack
2104 E. Locust
Decatur Il, 62521
 
Shop Hours
 
Monday - CLOSED
Tuesday 10:00am - 6:00pm
Wednesday 10:00am - 5:00pm
Thursday 10:00am - 6:00pm
Friday 10:00am - 5:00pm
Saturday 10:00am - 2:00pm
Sunday - CLOSED