[EFL2475] Extra 260 3D 480 ARF - MAP PRICE

The Extra 260 3D 480 ARF is one of the first E-flite® planes to use a new construction technique that eliminates unnecessary weight without sacrificing any strength. This super-lightweight construction, combined with its generous wing area, results in exceptionally light wing loading. Plus, its firewall is designed to accept E-flites powerful Park 480 Brushless Outrunner Motor, without modification. It all comes together to give you a fantastic flying 3D airplane without limits and with nothing but possibilities.

WARNING: Digital sub-micro servos have a higher current draw and may overload the BEC of the recommended Electronic Speed Control (ESC). Always be sure to position the ESC for maximum airflow since cooling can significantly aid in the performance of the BEC. Use of a separate BEC (like the UBEC) or receiver battery pack may also be necessary.

Use of servos other than those we recommend may overload the BEC of the recommended Electronic Speed Control (ESC). We suggest the use of only the servos we recommend when utilizing the recommended ESCs BEC, or the use of a separate BEC (like the UBEC) or receiver battery pack when using other servos.

You will need...

6-channel transmitter (for proper mixing and dual rate capabilities)
Micro receiver
4 sub-micro servos
Park 480 BL Outrunner Motor
40A Brushless ESC
12x6 Electric
Battery & Charger

Wing Span: 43 in (1090mm)
Overall Length: 40 in (1015mm)
Wing Area: 375 sq in (24.2 sq dm)
Flying Weight: 2629 oz (740820 g)
Motor Size: Park 480 BL Outrunner
Radio: 6 channels or more for proper mixing
Servos: Sub-micro (4)
Trim Scheme Colors: Pearl Purple (HANU847), Bright Yellow (HANU872), Silver (HANU881), Lite Transparent Clear (HANU964), Lite White (HANU973)
CG (center of gravity): 3 inches (75mm) to 3 1/8 inches (79mm)
Prop Size: 12x6 Electric
Spinner Size: 1 3/4 in
Hardware Included: Yes
Speed Control : 35A-40A Brushless
Recommended Battery: 1320-2100mAh 11.1V 3-cell Li-Po
Control Throw (Ailerons): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm)
Control Throw (Elevator): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm)
Control Throw (Rudder): Low 1-1/2-inch (38mm) or High 2-1/2-inch (64mm)
Scale: Park Flyer
Approx. Assembly Time: 4-6 hours