[FPWP4238] FlightPower LiPo EONX Lite 3S 11.1V 2500mAh 25C

FEATURES: Dean's Ultra Female connector installed on discharge leads
          90 day limited warranty commencing at the date of purchase, valid
            only in North America (USA, Canada and Mexico)
          50% Crash Coverage-In the unfortunate event that your FlightPower
            product suffers crash damage within the first 180 days after
            purchase, feel free to contact FlightPower USA Support.
            Upon providing evidence of crashed aircraft and pack(s),
            FlightPower USA is able to offer a replacement pack or packs at
            50% of the suggested selling price, plus shipping. Please do not
            ship your battery packs to FlightPower USA.

INCLUDES: FlightPower Eon-X Lite 2500mAh 3S 11.1V 25C LiPo Battery with
            FlightPower Balance Connector and Dean's Ultra Female Connector

REQUIRES: Balancer such as the ElectriFly Equinox LiPo Balancer (GPMM3160)
          3S adapter (GPMM3186) if using balancer listed above
          LiPo compatible charger

SPECS:    Length: 5.31" (135mm)
          Width: 1.73" (44mm)
          Height: 0.71" (18mm)
          Weight: 7.2oz (205g)
          *All weights and measurements are averaged and will vary slightly

          Capacity: 2500mAh
          Power Rating: 27.8W
          Max. Charge Current (3C): 7.5A
          Max. Continuous Discharge Current (25C): 62.5A
          Rated Voltage: 11.1V
          Number of Cells in Series: 3

COMMENTS: ALWAYS use a LiPo-approved Charger
          ALWAYS use a LiPo Cell Balancer
          NEVER Charge over 4.20V per cell
          NEVER Charge at currents greater than 1C
          NEVER Charge through the "To ESC or "DISCHARGE" lead
          NEVER Trickle Charge
          NEVER allow to Discharge below 2.5V per cell
          NEVER disassemble or modify pack wiring in any way or puncture cells
          NEVER place on combustible materials or leave unattended during
            charging
          ALWAYS Charge in a fireproof location
          ALWAYS set charger's output volts to match battery volts