This is the Radio Controlled, Glow Powered, Almost Ready-to-Fly, Great Planes U-Can-Do 3D .46 Aerobatic Airplane.
Slow flight characteristics suitable for first time low wing pilots.
Increase control throws to 3D levels for thrilling aerobatic performance.
For Intermediate to Advanced Modeler/Fliers.
FEATURES:
Construction: Balsa and plywood.
Wings: One-piece all wood, attaches to fuselage with two ¼-20 nylon wing bolts (included). Fully symmetrical, mid-wing placement.
Covering: Factory applied Top Flite MonoKote. Color scheme is White with swirls of Red, Dark Blue, and Yellow on the tail and wing sections. Bottom of wing is large Blue and White checkerboard pattern.
Cowling: Pre-painted White fiberglass-reinforced cowl and wheel pants
Canopy: Single, clear plastic.
Landing Gear: .12" (3mm) thick pre-formed aluminum.
Dual Aileron Servos: Standard size with at least 50 oz-in torque.
Building Time: Ready to fly in as little as six to eight hours.
Warranty Period: Great Planes warrants this kit free from defects in both material and workmanship at date of purchase.
This warranty does not cover any component parts damaged by use or modification.
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent .12" (3mm) main landing gear, .08" (2mm) tailwheel wire, 2¼" (57mm) main wheels, 1" (25mm) tailwheel, nylon adjustable engine mount, 8oz (270cc) fuel tank, 2" (51mm) red spinner, plywood servo trays, hardware package, decals, and photo-illustrated instructions.
REQUIRES: Engine: .32 -.50 (5-8cc) (2-stroke)
OR .52 -.70 (8-11cc) (4-stroke)
NOTE: For maximum 3D aerobatic performance, choose an engine in the upper power range.
Muffler: Stock type supplied with engine. Engine mounts in inverted position.
Radio: Four channel minimum, Six channel computerized radio recommended for maximum flexibility and performance.
Servos: Standard size 2 ball bearing-Aileron, 2 ball bearing-Elevator 1 high torque-Rudder, 1 standard-Throttle.
Servo Extensions: Two 6" (152mm) for ailerons and one 24" (610mm) for rudder and two 24" for elevator.
Y-Harness: One, for aileron servos, unless using computer radio.
Servo reversing y-harness for elevator servos unless using comp radio
Misc. Items: Glow plug, ¼" foam rubber padding, medium fuel tubing, fuel filter, propeller, building and field equipment.
SPECS: Wingspan: 56.75" (1441mm)
Wing Area: 904 sq in (58.3 sq dm)
Weight: 5 - 5lbs 10oz (2268-2551g)
Wing Loading: 12.7-14.3 oz/sq ft (39-44 g/dm2)
Incidence:
Wing: 0°
Stab: 0°
Engine: 1.5° down, 2° right
Length: 58.5" (1486mm)
Airfoil: Fully-symmetrical mid-wing
Center of Gravity: 4¾" (120mm) Back from the wing's leading edge
Control Throws-
Elevator: High Rate(3D) Up & Down 2¼" (57mm) Low Rate 1" (25.4mm)
Rudder: High Rate(3D) Right & Left 3½" (89mm) Low Rate 1½" (38mm)
Ailerons: High Rate(3D) Up & Down 2½" (63.5mm) Low Rate 1¼" (32mm)
The U-Can-Do 3D is covered with the following MonoKote colors:
Jet White (TOPQ0204) True Red (TOPQ0227)
Insignia Blue (TOPQ0207) Cub Yellow (TOPQ0220)
If a replacement fuel tank is needed, an 8oz (240cc) tank like
SULQ1439 can be used. Some minor modification may be needed as this
is not the exact shape of the original tank
COMMENTS: To convert this airplane to Brushless motor power, the following items are required:
KONG5060-Kontronik 600 Brushless Motor Set
(2) 3C 3200mAh Batteries wired in series
JTCG6801-Motor Mount
APCQ1506-15x6 Propeller for Electric Motors
GPMQ4610-6mm Prop Adapter Shaft
GPMQ4442-Double Sided Servo Tape
Tie Straps