[OFN14326] 1/8 Hyper 7 TQ Black RTR .28 Mac Star Hyper

This is the 1/8 scale glow powered, radio controlled, ready to run       
                  Ofna Hyper 7 TQ Pro Off Road Racing Buggy.                  
                                                                              
FEATURES: Chassis: 0.12" (3.2mm) hard coated countersunk aluminum chassis     
          Drive: Four wheel drive shaft drive                                 
          Aluminum: Shock towers, bellcrank plate, fuel filter and            
            suspension arm plates                                             
          Graphite: Radio tray plate, transponder mount and bellcrank/front   
            chassis brace                                                     
          Torsen braces: Front and rear one piece, purple anodized            
          Radio: 3-channel 2.4GHz LED Edition with steering and throttle      
            trim and reverse, two servos                                      
          Engine: Ofna Hyper .28 with glow plug, slide valve carburetor and   
            pull-starter                                                      
          Exhaust: Two chamber polished natural finish aluminum tuned pipe    
          Fuel Tank: 4.6oz (135cc) flip top cap                               
          Clutch: 3-shoe                                                      
          Transmission: Single speed                                          
          Ball Bearing: Full set                                              
          Shocks: Oil-filled, anodized aluminum body with coil over spring,   
            0.14" (3.5mm) shaft diameter and rubber shock shaft boots         
          Clutch Bell: 14 tooth                                               
          Main Gear: 47 tooth, steel construction                             
          Gearbox: Sealed, both Front and Rear                                
          Differentials: Front, center and rear planetary differentials       
          Brakes: Single disk front and rear with Feonado pads                
          Tires: 4-1/4" (102mm) diameter 1-5/8" (41mm) wide Avenger tires     
          Wheels: 3-1/4" (81mm) diameter 1-5/8" (41mm) wide that accept a     
            17mm drive hex                                                    
          Body: Painted and trimmed buggy body                                
          Bumpers: Front high strength                                        
          Suspension: Front and rear double wishbone with CNC milled 7075     
            rear components, hard coated suspension plates                    
          Caster: Adjustable, caster/toe-in refers to the angle of the front  
            suspension when viewed from the side of the car in relation to the
            chassis                                                           
          Camber: Adjustable, camber refers to the angle of the tops of the   
            tires from vertical when viewed from front or behind vehicle      
          Steering: Plastic Bell Crank                                        
          Servo Saver: Included, built into the right bellcrank               
                                                                              
INCLUDES: Hyper 7 TQ Pro rolling chassis with aluminum shocks, six universal  
            drive shafts, painted body, tires, foam inserts, wheels, wrench   
            aluminum front and rear braces, 47 tooth spur gear, fuel bottle,  
            14 tooth clutch bell, 2.4GHz 3-ch radio, .28 engine, 4-way wrench 
            extra shock pre-tensioners, D-size glow starter and photo-        
            illustrated manual                                                
                                                                              
REQUIRES: AA Batteries: 12, eight for radio and four for receiver             
          D Battery: 1 for glow starter                                       
          Misc. Items: Building and track equipment                           
          Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-   
            Most of the fuels we carry meet or exceed the lubricant content   
            required for optimum performance and maximum engine life.  In the 
            past, the conventional lubricant content used in fuel was 18%.  But
            with new advanced technologies, fuels like Red Alert and O'Donnell
            for example, have a better quality of lubricants even though the  
            percentages of lubricant content are lower.  These high-tech      
            lubricants provide exceptional cooling and protection.            
                                                                              
SPECS:      Vehicle-                                                          
          Length:          19.6" (498mm)                                      
          Width:           13.8" (310mm)                                      
          Height:           7.3" (185mm)                                      
          Weight:        7.7 lbs (3500g)(approx.)                             
          Wheelbase:       12.9" (327mm)  (wheels on-center front-to-rear)    
          Tread- Front-       Rear-       (wheels on-center side-to-side)     
          Front Track:     10.2" (258mm)                                      
          Rear Track:      10.2" (258mm)                                      
          Tires- Front:     3.2" x 1.7" (81x43mm)                             
                  Rear:     3.2" x 1.7" (81x43mm)                             
            Body-                                                             
          Length:    15" (380mm)                                              
          Width:  8-5/8" (220mm) at widest point                              
          Height: 3-3/4" (95mm)                                               
                                                                              
COMMENTS: For Replacement Ball Bearings use:                                  
            Qty.  Size      Location                      Bearing Set Qty.    
           (18)  8 x 16mm front & rear diff gears, axles  (use 1-DTXC1587)    
                                                          (use 4-DTXC1585)    
            (2)  6 x 10mm steering bellcrank              (use 1-DTXC1561)    
            (2)  5 x 10mm clutchbell                      (use 1-DTXC1535)    
                                                                              
          (As of 5/5/08) New Hyper 7 TQ B now includes black aluminum and     
            14mm Big Bore Shocks.