The perfect beginner FPV drone designed for indoor flying in even the
smallest of places, the Blade® Inductrix® FPV drone is an ultra-micro
marvel. It’s fully integrated, tuned and equipped so you can be
exploring a new world in minutes.
- NOTE: A HAM license is required to operate the Video Transmitter in the U.S.
- Intuitive flight modes that make flying simple
- Fully integrated FPV flight camera on 5.8GHz
- Quiet EDF power system
- Improved motors for better response
- Durable rotor housings prevent damage
- Lightweight and fully-assembled with no building required
- 40ch 4.3" monitor with mount
- E-flite® 200mAh 45C Li-Po flight battery and USB charger (included)
When Jesse Perkins first flew the Inductrix® quadcopter, he knew that
there was more to the experience yet to be unlocked. He mounted a small
FPV camera and video transmitter, upgraded the motors, found a better
battery and called it the Tiny Whoop™. Soon, thousands of Inductrix
owners were flying in places they never thought possible! The Inductrix
FPV provides the freedom of flight in a fully ready-to-fly package. No
soldering or 3D printing required! Enjoy a world you never knew existed
when you are in the pilot's seat of the Inductrix FPV!
The Inductrix® FPV from Blade® builds on the wildly popular platform
and transforms it into an incredible FPV machine right out of the box.
With its integrated 25mW video transmitter, FPV camera, high performance
motors and large 200mAh battery, the Inductrix FPV is capable of flying
in the smallest of places with ease. Enjoy the view as SAFE® technology
makes flying simple and while the ducted propeller design allows you to
bounce of walls and objects without crashing! Not only does the
Inductrix FPV come out of the box with everything installed on the
aircraft itself you get a 4.3” FPV monitor (RTF only) that completes the
entire FPV experience! If you are looking for that immersive goggle
experience, the headset adaptor can be purchased separately too!
SAFE® equipped
SAFE (Sensor Assisted Flight Envelope) technology is a revolutionary
electronic flight envelope protection system. This technology allows
anyone to pick up the transmitter, put on the goggles and be successful
flying FPV for the very first time. Its newly improved Stability mode
allows for fast forward flight with the added weight of the FPV system.
It prevents over controlling the aircraft and gives a confident feeling
when maneuvering through tight spaces. The Agility mode has also been
tuned for the high output motors and weight of the FPV system on board.
It allows for aggressive forward flight and even some mild aerobatics.
FPV equipped
The Inductrix FPV is equipped with a 25mW video transmitter capable
of transmitter on Fat Shark channels 1 through 8 and all Raceband
channels so you can race several pilots at once. You can select channels
from the easy to use button atop the body of the Inductrix. The camera
is very lightweight and perfectly protected in the body housing. The
antenna we’ve chosen for video transmission is a dipole and designed
with durability in mind. Video range of the Inductrix FPV is nearly 100
yards line of sight and more than adequate to fly in any large building
or home.
High Performance Motors
We’ve tweaked the flight controller to better control in stability
mode by allowing pitch to remain as the user demands even if throttle is
full and agility mode is more crisp and controllable too!
200 mAh battery
Included is a large capacity 200 mAh battery so that you can fly upwards of 4 minutes.
4.3” FPV Monitor Included
The included FPV monitor is a 4.3” Spektrum (SPMVM430) and is the
perfect solution for FPV without having to pony up the cost of a full
goggle system. The monitor is rechargeable via micro USB and has a 1.5hr
run time before it needs to recharge. It is capable of receiving on 40
channels and can be clipped on to the MLP4 radio for hands free
operation.
The best part about the included monitor is that you can upgrade it
to the full headset with the headset adaptor. This gives you an
inexpensive way to have the immersive experience of a full goggle.
LED Lighting
With brilliant white and red LED lighting illuminating each Inductrix
FPV, it’s easy to follow friends while flying together or even see if
the battery is getting low when they begin to blink. The lights are
mounted inside each frame so they too will be protected in a crash.
Quiet Ducted Fans
Each rotor is housed in a true duct and is extremely quiet during
flight. The benefit of using ducted fans instead of propellers is they
fully protect the fans in a crash and prevents the Inductrix from
causing any damage to walls and is safe enough to be caught by hand!
Type: Multi-Rotor
Gross Weight: 24g
Length: 83mm
Kit/ARF/RTF: RTF
Experience Level: Beginner
Recommended Environment: Indoor
Is Assembly Required: No